Dakota Digital LAT-NR101 User Manual download pdf (Page 3)

9. Screw the mounting plate into the mount using the two previously removed 3/8” #6 screws.

This will secure the LED assembly into the housing. You are now ready for re-assembly.

10. Repeat the steps above for the second light.

11. Install the lens and reassemble the housing, insuring all gaskets are intact and in place. Install

the housing back into the vehicle. You are now ready to wire the LED assembly into the

vehicle harness.

MAN# 650195

1 2 3 4

No comments

Dakota Digital LAT-NR101 User Manual Page 3