MAN# 650369
• Remove the dash
• Unclip and unplug the factory gauge
• Insure that the rubber gasket is still in the dash or
remove from factory gauge and place back on dash
• Insert new gauge from front of dash
• Plug in and turn on so you can straighten
the gauge in the dash
• Use supplied L-brackets along with the 8-32 screws
and lock washers to secure the gauge
• Reinstall the dash
Wiring
The gauge is a direct plug in on 2011 or newer Softail and 2012 or newer Dyna. The only wiring, which is optional,
is for the auxiliary pressure/temp gauges if you choose.
WIRING COLOR CODE FOR AUXILARY TEMPERATURE OR PRESSURE GAUGE:
MCL-2011 Function
BLUE SEN-1043 or SEN-1044 temperature sensor signal
BLACK SEN-1044 temperature sensor ground
WHITE/RED SEN-1039 pressure sensor RED wire
GRAY SEN-1039 pressure sensor WHITE wire
BLACK SEN-1039 pressure sensor BLACK wire
POWER
Constant battery power is supplied by the stock harness.
GROUND
Ground is supplied by the stock harness.
Comments to this Manuals