Dakota Digital 3X Series Service Manual download pdf (Page 3)

MAN 650067:G

MOUNTING VFD3X-1002B SYSTEMS

There are two methods for mounting the display assembly into your dash. The first

method is to cut an opening in the dash the size of the inside lip and “sandwich” the display

assembly between the bezel and the mounting plate. The second method is to cut an opening

in the dash the size of the outside of the bezel and mount the entire display assembly from the

back using six #10 or #8 mounting studs attached to the back of the dash.

Figure 1 shows method #1 with a steel or thin fiberglass dash. Figure 2 shows Method

#1 with a thick fiberglass or wood dash. Figure 3 shows Method #2.

Tooth w ash er

foam tape

Pan head screws

Lens

You r da sh

m aterial.

B ezel

M ou nting plate

with studs

Display Panel

Nut

Figure 1. Mounting Method #1 with thin dash.

Bezel

Lens

Pan head screws

Display Panel

Your dash

material.

Tooth washer

Mounting plate

with studs

Nut

Figure 2. Mounting Method #1 with thick dash.

1 2 3 4 5 6 7 8 ... 35 36

No comments

Dakota Digital 3X Series Service Manual Page 3