Dakota-digital LAT-NR162 User Manual download pdf

MAN#650160

INSTALLATION INSTRUCTIONS

LAT-NR162

LED Tail Lights for ’66 Impala/Caprice and ’67 Caprice

MAN#650160

Kit Includes:

Installation:

’66 Impala ’66 Caprice ’67 Caprice

1. Remove the original bulb connector from the back side of the housing.

2. Remove the light bulb.

3. Remove the tail light housing from the car. There are nuts inside the trunk on the back side of

the housing.

4. Remove the chrome trim plate and tail light lens. These screws are on the back side of the

housing.

5. Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is

recommended.

1 2 3 4

MAN#650160 INSTALLATION INSTRUCTIONS LAT-NR162 LED Tail Lights for ’66 Impala/Caprice and ’67 Caprice MAN#650160 Kit Includes: Installation: ’66

MAN#650160 6. Remove the screw and aluminum back plate from the new LED assembly. The center hole in the ’67 Caprice is smaller and offset so there

Page 3

MAN#650160 10. Place the original lens gasket into place and replace the tail light lens. 11. Replace the chrome trim and then tighten the screws do

Page 4

MAN#650160 Service and Repair DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is

No comments

Dakota-digital LAT-NR162 User Manual