Dakota-digital LED Tail Lights LAT-NR161 User Manual download pdf

MAN#650159c

INSTALLATION INSTRUCTIONS

LAT-NR161

LED Tail Lights for ’60-‘65 Impala/Bel Air/Biscayne, ’67 Impala,

‘75-‘76 Caprice, and ’71-’73 Mustang

MAN#650159c

Kit Includes:

Installation:

1. Remove the original bulb connector from the back side of the housing.

2. Remove the light bulb.

3. Remove the tail light lens.

• On the 60-65 Impala, the screws are directly in the lens.

• On the 67 Impala, the nuts securing the tail light assembly must be removed first from

inside the trunk. Once the assembly is removed, the screws on the back of the housing

can be taken out.

• On the 75-76 Caprice, the nuts securing the tail light assembly must be removed first from

inside the trunk. Once the assembly is removed, the screws on the top and bottom sides of

the housing are removed and the metal trim taken off. Last the screws holding the lens are

removed so the lens can come off.

• On the 71-73 Mustang, the lens is snapped into place with tabs around the outside edge.

Carefully pry the lens off using a flat blade screwdriver.

1 2 3 4

MAN#650159c INSTALLATION INSTRUCTIONS LAT-NR161 LED Tail Lights for ’60-‘65 Impala/Bel Air/Biscayne, ’67 Impala, ‘75-‘76 Caprice, and ’71-’73 Mustan

MAN#650159c • 4. Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is recommended. 5. Remove the screw

Page 3

MAN#650159c 8. Secure the back plate with the supplied #6 screw and lock washer. 9. Place the original lens gasket into place and replace the

Page 4

MAN#650159c LED wires Vehicle harness Taillight Brown Brown or Black Driver’s Turn Green Green or Pink Passenger’s Turn Green Yellow, Purple, or Ora

No comments

Dakota-digital LED Tail Lights LAT-NR161 User Manual