Dakota Digital LAT-NR200 User Manual download pdf (Page 2)

7. Insert the wires through the aluminum spacer, with one wire going

through each one of the outer holes. Ensure wires are not pinched to

avoid shorting! Slide the aluminum spacer over the stud thorough the

hole in the center of the spacer, shoulder side toward the back of the tail

light bezel.

8. Secure the aluminum spacer with the supplied #6 nut and lock washer.

9. Make sure the original lens gasket is in place and replace the tail light

lens. Tighten the screws down carefully.

MAN#650184

1 2 3

No comments

Dakota Digital LAT-NR200 User Manual Page 2