Dakota Digital LAT-NR200 User Manual download pdf (Page 1)

INSTALLATION INSTRUCTIONS

LAT-NR200

LED Tail Lights for 1956 Chevy Car

MAN#650184

Kit Includes:

Installation:

1. Remove the two screws that are in the tail light lens, and

remove the lens.

2. Remove the light b

ulb.

3. ush and twist to remove the plastic bulb socket from the back side of the

4. ow is a good time to clean the lens and housing. If lenses are in bad shape a new set is

5. , washer, and aluminum spacer from the back of the

n is

6. sert the new LED assembly, wires first, through the hole where the

housing.

recommended.

Remove the nut

new LED assembly, noting how it is assembled for re-assembly.

Gently pull the wires through the aluminum spacer so the insulatio

not damaged.

original bulb and plastic socket were. Use caution when feeding the

wires through to avoid damaging the wire insulation.

MAN#650184

1 2 3

INSTALLATION INSTRUCTIONS LAT-NR200 LED Tail Lights for 1956 Chevy Car MAN#650184 Kit Includes: Installation: 1. Remove the two screws that are in

7. Insert the wires through the aluminum spacer, with one wire going through each one of the outer holes. Ensure wires are not pinched to avoid shor

Page 3

10. Cut off the existing light socket as it will not be used. Do not strip the wires. Trim the wires from LED assembly to appropriate length once mo

No comments

Dakota Digital LAT-NR200 User Manual Page 1