Dakota Digital STR6D Service Manual download pdf (Page 20)

650066

CLOCK

Wiring instructions for VFD systems with a clock built in.

Introduction:

The clock displays the current time in 12 hour format with an AM/PM indicator. The AM/PM indicator

appears as a dot that will be displayed in the upper left corner. The dot will be on every other 12 hour period (on

during AM and off during PM). The high brightness display matches our other Odyssey and STR series gauges

and has the same night brightness dimming capability. Features included are:

• Quartz accuracy.

• Night dimming feature.

• Very low standby power to prevent battery drain.

• High Visibility VFD display for sunlight readability.

Operation:

The gauge needs the red, orange, and black wires connected to operate. The red wire should have

switched 12 volt power from an ACC. point on the fuse panel. The orange wire should have constant 12 volt

power. The black wire should be connected to a good ground point. When the blue wire has 12 volts, it will dim the

display for night viewing.

Setting the time:

Using a small, thin object such as a pen or hairpin, press “set” buttons through front lens access holes.

The access holes are on the right side of the lens. Top “set” button advances hours, bottom “set” button advances

minutes.

Wiring:

BLACK - connect to a good ground point in the vehicle.

RED - connect to switched 12 volt power point.

(An accessory terminal will work for this.)

ORANGE - connect to a constant 12 volt power point.

(This will keep the correct time.)

BLUE - connect to the tail light circuit.

SERVICE AND REPAIR

DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any

questions or problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most

problems.

Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise

Authorization number. Package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure

to include the RMA number on the package, and include a complete description of the problem with RMA number, your full name and address (street address

preferred), and a telephone number where you can be reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from

your place of purchase. Send no money. We will bill you after repair.

Dakota Digital Limited Lifetime Warranty

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in

material or workmanship for the lifetime of the original vehicle it was installed in, such defect(s) will be repaired or replaced at Dakota Digital’s option.

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product. This Warranty

does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse,

neglect, or accident.

This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be

limited to the duration of this written warranty. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in

connection with the sale of this product.

4510 W. 61ST St. N., Sioux Falls, SD 57107

Phone: (605) 332-6513 FAX: (605) 339-4106

www.dakotadigital.com

dakotasupport@dakotadigital.com

1 2 ... 15 16 17 18 19 20

Comments to this Manuals

No comments

Dakota Digital STR6D Service Manual Page 20

Comments to this Manuals

Related products and manuals for Motor vehicle electronics Dakota Digital STR6D