Dakota Digital 2000 Series Specifications download pdf (Page 10)

MAN# 650023B

TROUBLE SHOOTING GUIDE

Problem Cause Solution

None of the lights will come on. Power wire not connected. Make sure +12 volt wire is connected.

Ground wire not connected. Make sure the ground wire is

connected to a good ground.

Always shows the same Sensor wire not connected. Make sure all three wires from

gear or will not set the sensor are connected.

properly. Sensor arm not connected. Make sure the sensor arm

moves as the gear selector

is moved.

Sensor linkage connector Make sure the linkage

is stuck or bound up. connector and sensor arm

move freely as the trans. is

shifted through the gears

Decoder is set for wrong output Repeat steps 1-4 in Programming the Gears

type. on page 3 and select all red lights on.

Decoder has not been set. See Programming the Gears

section on page 3 of the manual.

Indicator lights are all on Decoder is set for wrong output Repeat steps 1-4 in Programming the Gears

Except for the correct gear. type. on page 3 and select the opposite light color.

(red or green).

Reverse and Overdrive lights Sensor ground wire open. Check sensor wire connections.

are on at the same time. Sensor is moving out of its Loosen sensor arm set screw. Rotate the sensor

operating range. shaft so that the slot in the end aligns with the

sensor arm. Retighten set screw. (see page 5)

Overdrive and Second lights Sensor RED wire open. Check sensor wire connections.

are on at the same time. Sensor signal wire is shorted Check sensor cable.

to ground.

Sensor is moving out of its Loosen sensor arm set screw. Rotate the sensor

Operating range. shaft so that the slot in the end aligns with the

sensor arm. Retighten set screw. (see page 5)

Overdrive, Neutral, and Drive Decoder settings are incorrect Reprogram the decoder.

Lights are flashing. or have been corrupted. See the Programming The Gears section on page 3.

The neutral safety relay Decoder is losing power Make sure PWR terminal has 12 volts when the key

And unit just make is in both the on and start positions.

“clicking” sound.

The neutral safety does Decoder is losing power Make sure PWR terminal has 12 volts when the key

not allow the starter to when key is placed in is in both the on and start positions.

engage. the start position.

SERVICE AND REPAIR

DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions

or problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems.

Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization

number. Package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure to include the RMA

number on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone

number where you can be reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase. Send no

money. We will bill you after repair.

Dakota Digital Limited Lifetime Warranty

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or

workmanship for the lifetime of the original vehicle it was installed in, such defect(s) will be repaired or replaced at Dakota Digital’s option.

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product. This Warranty does

not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or

accident.

This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be limited

to the duration of this written warranty. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with

the sale of this product.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Dakota Digital 2000 Series Specifications Page 10

Comments to this Manuals

Related products and manuals for Motorcycle Accessories Dakota Digital 2000 Series